กำลังแสดงผล 1 ถึง 4 จากทั้งหมด 4

หัวข้อ: Unix ทิป: Putty ผ่าน sshd แล้ว ทำไม ช้าจัง

  1. #1

    Unix ทิป: Putty ผ่าน sshd แล้ว ทำไม ช้าจัง

    หากเรากำหนด dns ในไฟล์ /etc/resolv.conf ไม่ถูกต้อง
    จะทำให้เวลาที่เราใช้โปรแกรม putty.exe หรืออื่น ๆ logon
    เข้าไปยัง server FreeBSD นั้นอาจจะต้องใช้เวลาในการรอ(นานมาก ๆ) ดังนั้นขอให้ตรวจสอบค่าของ DNS ให้ถูกต้องด้วยครับ เพราะจ้าว sshd นั้นจะมีการตรวจสอบ DNS ด้วยว่ามีการ
    ทำงานอยู่หรือเปล่า หากหา DNS ไม่พบก็จะต้องรอนานหน่อย

    วิธีการแก้ไขอีกวิธี เพื่อหลีกเลี่ยงการทดสอบ DNS
    ของ sshd ให้แก้ไขไฟล์ /etc/ssh/sshd_config
    โดยกำหนดตัวแปร UseDNS no ครับ
    อ้างอิงจาก อ.กิตติพงษ์


  2. #2
    นักการภารโรง สัญลักษณ์ของ บ่าวคนเดิม
    วันที่สมัคร
    Jan 2006
    ที่อยู่
    Amphoe Det Udom
    กระทู้
    3,148

    Re: Unix ทิป: Putty ผ่าน sshd แล้ว ทำไม ช้าจัง

    แสดงว่ารีโมตเข้าเครื่องผมช้าล่ะซิท่าน.....เอิ๊กๆๆ Re: Unix ทิป: Putty ผ่าน sshd แล้ว ทำไม ช้าจัง ขอบคุณครับ จะรีบแก้ไขโดยด่วน 8)

    ถ้ามีตัวอย่างไฟล์เปรียบเทียบก็จะดีน่ะท่าน....
    ขอบพระคุณสมาชิกและทีมงานที่เคารพรักทุกท่าน

  3. #3

    Re: Unix ทิป: Putty ผ่าน sshd แล้ว ทำไม ช้าจัง

    จัดให้

    โค้ด:
    #	$OpenBSD: sshd_config,v 1.72 2005/07/25 11:59:40 markus Exp $
    #	$FreeBSD: src/crypto/openssh/sshd_config,v 1.42.2.1 2005/09/11 16:50:35 des Exp $
    
    # This is the sshd server system-wide configuration file. See
    # sshd_config(5) for more information.
    
    # This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
    
    # The strategy used for options in the default sshd_config shipped with
    # OpenSSH is to specify options with their default value where
    # possible, but leave them commented. Uncommented options change a
    # default value.
    
    # Note that some of FreeBSD's defaults differ from OpenBSD's, and
    # FreeBSD has a few additional options.
    
    #VersionAddendum FreeBSD-20050903
    
    #Port 22
    #Protocol 2
    #AddressFamily any
    #ListenAddress 0.0.0.0
    #ListenAddress ::
    
    # HostKey for protocol version 1
    #HostKey /etc/ssh/ssh_host_key
    # HostKeys for protocol version 2
    #HostKey /etc/ssh/ssh_host_dsa_key
    
    # Lifetime and size of ephemeral version 1 server key
    #KeyRegenerationInterval 1h
    #ServerKeyBits 768
    
    # Logging
    # obsoletes QuietMode and FascistLogging
    #SyslogFacility AUTH
    #LogLevel INFO
    
    # Authentication:
    
    #LoginGraceTime 2m
    #PermitRootLogin no
    #StrictModes yes
    #MaxAuthTries 6
    
    #RSAAuthentication yes
    #PubkeyAuthentication yes
    #AuthorizedKeysFile	.ssh/authorized_keys
    
    # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
    #RhostsRSAAuthentication no
    # similar for protocol version 2
    #HostbasedAuthentication no
    # Change to yes if you don't trust ~/.ssh/known_hosts for
    # RhostsRSAAuthentication and HostbasedAuthentication
    #IgnoreUserKnownHosts no
    # Don't read the user's ~/.rhosts and ~/.shosts files
    #IgnoreRhosts yes
    
    # Change to yes to enable built-in password authentication.
    #PasswordAuthentication no
    #PermitEmptyPasswords no
    
    # Change to no to disable PAM authentication
    #ChallengeResponseAuthentication yes
    
    # Kerberos options
    #KerberosAuthentication no
    #KerberosOrLocalPasswd yes
    #KerberosTicketCleanup yes
    #KerberosGetAFSToken no
    
    # GSSAPI options
    #GSSAPIAuthentication no
    #GSSAPICleanupCredentials yes
    
    # Set this to 'no' to disable PAM authentication, account processing, 
    # and session processing. If this is enabled, PAM authentication will 
    # be allowed through the ChallengeResponseAuthentication mechanism. 
    # Depending on your PAM configuration, this may bypass the setting of 
    # PasswordAuthentication, PermitEmptyPasswords, and 
    # "PermitRootLogin without-password". If you just want the PAM account and 
    # session checks to run without PAM authentication, then enable this but set 
    # ChallengeResponseAuthentication=no
    #UsePAM yes
    
    #AllowTcpForwarding yes
    #GatewayPorts no
    #X11Forwarding yes
    #X11DisplayOffset 10
    #X11UseLocalhost yes
    #PrintMotd yes
    #PrintLastLog yes
    #TCPKeepAlive yes
    #UseLogin no
    #UsePrivilegeSeparation yes
    #PermitUserEnvironment no
    #Compression delayed
    #ClientAliveInterval 0
    #ClientAliveCountMax 3
    UseDNS no
    #PidFile /var/run/sshd.pid
    #MaxStartups 10
    
    # no default banner path
    #Banner /some/path
    
    # override default of no subsystems
    Subsystem	sftp	/usr/libexec/sftp-server

  4. #4
    นักการภารโรง สัญลักษณ์ของ บ่าวคนเดิม
    วันที่สมัคร
    Jan 2006
    ที่อยู่
    Amphoe Det Udom
    กระทู้
    3,148

    Re: Unix ทิป: Putty ผ่าน sshd แล้ว ทำไม ช้าจัง

    ขอบคุณหลายท่าน....เดี่ยวซิเอาไปเปรียบเทียบเบิ่งหาข้อผิดพลาด....8)
    ขอบพระคุณสมาชิกและทีมงานที่เคารพรักทุกท่าน

Tags for this Thread

กฎการส่งข้อความ

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •