กำลังแสดงผล 1 ถึง 6 จากทั้งหมด 6

หัวข้อ: การทำ STABLE FreeBSD 6.1 แบบ Step by Step (Upgrade System from Sources)

  1. #1

    การทำ STABLE FreeBSD 6.1 แบบ Step by Step (Upgrade System from Sources)

    ขั้นตอนต่างๆ ขอให้ทำไปทีละขั้น ทีล่ะตอน อย่าข้าม และเมื่อจบทั้งขบวนการแล้ว
    ท่านมี ระบบใหม่ ทั้ง kernel และ systems แน่นอน รับประกันได้

    ติดตั้ง cvsup ก่อน (ถ้าเคยติดตั้งไปก่อนหน้านี้แล้วก็ไม่ต้องทำ)
    โค้ด:
    #cd /usr/ports/net/cvsup-without-gui 
    #make install clean
    #rehash
    จากนั้น cvsup เอา src ใหม่มา
    โค้ด:
    #cvsup -g -L 2 -h cvsup5.freebsd.org /usr/share/examples/cvsup/stable-supfile
    (server cvsup5.freebsd.org ถ้า 5 ไม่ได้ ให้เปลี่ยนไปเรื่อยๆ มีตั้งแต่ 1 - 18 เลือกเอาเอง)


    ถ้าจะแก้ไข kernel configuration ก่อน ก็ให้ไปแก้ที่ไฟล์ /usr/src/sys/i386/conf/GENERIC
    หรือจะสำเนาออกมาไว้อีกชุดก็ได้ เช่นชื่อ MYKERN

    โค้ด:
    #cp /usr/src/sys/i386/conf/GENERIC /usr/src/sys/i386/conf/MYKERN 
    #pico /usr/src/sys/i386/conf/MYKERN
    แก้ไขค่าต่างๆตามความเหมาะสม เซฟไฟล์ แล้วออกจาก pico

    โค้ด:
    #cd /usr/src 
    #make buildworld 
    #make buildkernel KERNCONF=MYKERN 
    #make installkernel KERNCONF=MYKERN 
    #mergemaster -p 
    #shutdown -r now
    พอ boot เข้าไปที่หน้าเมนู (เวลานับเวลาถอยหลัง 10 วินาที)
    ให้เลือกเมนู 4 เพื่อเข้าสู่ single user mode แล้วสั่ง mount partition ตามคำสั่งดังนี้
    โค้ด:
    #fsck -p 
    #mount -uw / 
    #mount -a -t ufs 
    #swapon -a 
    #adjkerntz -i 
    #cd /usr/src 
    #make installworld 
    #mergemaster -cv
    How should I deal with this? [Use the existing /var/tmp/temproot] ตรงนี้ให้ตอบ d เพื่อลบข้อมูลเก่าทิ้ง
    *** Press the [Enter] or [Return] key to continue เคาะ Enter ไปเลย
    ขั้นตอนนี้กด i เพื่อ install ได้เลยมันจะโชว์ไฟล์ระบบที่ได้มาใหม่ กับของเก่าที่มีอยู่อ่านให้ดี ๆ
    พึงใช้สามัญสำนึกให้มากๆไว้ตรงนี้ด้วยว่า อย่างพวก /etc/group, /etc/passwd.master หรือถ้าจัด named.conf ไว้แล้ว ก็อย่าไปรับของใหม่มา
    จากนั้นรีบูตเครื่องอีกครั้ง
    โค้ด:
    #shutdown -r now
    เมื่อทุกอย่างเรียบร้อย พอบูตเข้าระบบท่านก็จะมี system = 6.1-STABLE และ MYKERN kernel ทันที !
    ลองใช้คำสั่ง umane -a
    ก็จะเห็นเป็น FreeBSD 6.1-STABLE และ MYKERNEL สมใจแล้วละครับ

    แหล่งเอกสารอ้างอิง:

    http://www.freebsd.org/doc/en_US.ISO...ook/cvsup.html
    http://www.freebsd.org/doc/en_US.ISO...makeworld.html

    ปล. ในการทำ Stable นั้น ไม่ต้องห่วงว่า ข้อมูลในเครื่องจะหาย
    คนล่ะส่วนกัน นี่เค้าเรียกว่า Kernel ไม่ใช่ Package
    และถ้าจะให้ดีนะครับ อยากจะแนะนำว่า ควรทำก่อนการติดตั้ง FAMP (FreeBSD Apache MySQL PHP

    ตัวอย่างไฟล์ /usr/src/sys/i386/conf/MYKERN
    โค้ด:
    #
    # GENERIC -- Generic kernel configuration file for FreeBSD/i386
    #
    # For more information on this file, please read the handbook section on
    # Kernel Configuration Files:
    #
    #  http://www.FreeBSD.org/doc/en_US.ISO...ig-config.html
    #
    # The handbook is also available locally in /usr/share/doc/handbook
    # if you've installed the doc distribution, otherwise always see the
    # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
    # latest information.
    #
    # An exhaustive list of options and more detailed explanations of the
    # device lines is also present in the ../../conf/NOTES and NOTES files.
    # If you are in doubt as to the purpose or necessity of a line, check first
    # in NOTES.
    #
    # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.7.2.2 2006/05/01 00:15:12 scottl Exp $
    
    machine		i386
    #cpu		I486_CPU
    #cpu		I586_CPU
    cpu		I686_CPU
    ident		KUNDREAM
    
    # To statically compile in device wiring instead of /boot/device.hints
    #hints		"GENERIC.hints"		# Default places to look for devices.
    
    makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
    
    #options 	SCHED_ULE		# ULE scheduler
    options 	SCHED_4BSD		# 4BSD scheduler
    options 	PREEMPTION		# Enable kernel thread preemption
    options 	INET			# InterNETworking
    options 	INET6			# IPv6 communications protocols
    options 	FFS			# Berkeley Fast Filesystem
    options 	SOFTUPDATES		# Enable FFS soft updates support
    options 	UFS_ACL			# Support for access control lists
    options 	UFS_DIRHASH		# Improve performance on big directories
    options 	MD_ROOT			# MD is a potential root device
    options 	NFSCLIENT		# Network Filesystem Client
    options 	NFSSERVER		# Network Filesystem Server
    options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
    options 	MSDOSFS			# MSDOS Filesystem
    options 	CD9660			# ISO 9660 Filesystem
    options 	PROCFS			# Process filesystem (requires PSEUDOFS)
    options 	PSEUDOFS		# Pseudo-filesystem framework
    options 	GEOM_GPT		# GUID Partition Tables.
    options 	COMPAT_43		# Compatible with BSD 4.3 [KEEP THIS!]
    options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
    options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
    #options 	SCSI_DELAY=5000		# Delay (in ms) before probing
    options 	KTRACE			# ktrace(1) support
    options 	SYSVSHM			# SYSV-style shared memory
    options 	SYSVMSG			# SYSV-style message queues
    options 	SYSVSEM			# SYSV-style semaphores
    options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
    options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
    options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
    					# output. Adds ~128k to driver.
    options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
    					# output. Adds ~215k to driver.
    options 	ADAPTIVE_GIANT		# Giant mutex is adaptive.
    
    device		apic			# I/O APIC
    
    # Bus support.
    device		eisa
    device		pci
    
    # Floppy drives
    device		fdc
    
    # ATA and ATAPI devices
    device		ata
    device		atadisk		# ATA disk drives
    #device		ataraid		# ATA RAID drives
    #device		atapicd		# ATAPI CDROM drives
    device		atapifd		# ATAPI floppy drives
    #device		atapist		# ATAPI tape drives
    options 	ATA_STATIC_ID	# Static device numbering
    
    # SCSI Controllers
    #device		ahb		# EISA AHA1742 family
    #device		ahc		# AHA2940 and onboard AIC7xxx devices
    #device		ahd		# AHA39320/29320 and onboard AIC79xx 
    #devices
    #device		amd		# AMD 53C974 (Tekram DC-390(T))
    #device		isp		# Qlogic family
    ##device 	ispfw		# Firmware for QLogic HBAs- normally a 
    #module
    #device		mpt		# LSI-Logic MPT-Fusion
    #device		ncr		# NCR/Symbios Logic
    #device		sym		# NCR/Symbios Logic (newer chipsets + 
    #those of `ncr')
    #device		trm		# Tekram DC395U/UW/F DC315U adapters
    
    #device		adv		# Advansys SCSI adapters
    #device		adw		# Advansys wide SCSI adapters
    #device		aha		# Adaptec 154x SCSI adapters
    #device		aic		# Adaptec 15[012]x SCSI adapters, 
    #AIC-6[23]60.
    #device		bt		# Buslogic/Mylex MultiMaster SCSI adapters
    
    #device		ncv		# NCR 53C500
    #device		nsp		# Workbit Ninja SCSI-3
    #device		stg		# TMC 18C30/18C50
    
    # SCSI peripherals
    device		scbus		# SCSI bus (required for SCSI)
    #device		ch		# SCSI media changers
    device		da		# Direct Access (disks)
    #device		sa		# Sequential Access (tape etc)
    #device		cd		# CD
    #device		pass		# Passthrough device (direct SCSI access)
    #device		ses		# SCSI Environmental Services (and 
    #SAF-TE)
    
    # RAID controllers interfaced to the SCSI subsystem
    #device		amr		# AMI MegaRAID
    #device		arcmsr		# Areca SATA II RAID
    #device		asr		# DPT SmartRAID V, VI and Adaptec SCSI 
    #RAID
    #device		ciss		# Compaq Smart RAID 5*
    #device		dpt		# DPT Smartcache III, IV - See NOTES for 
    #options
    #device		hptmv		# Highpoint RocketRAID 182x
    #device		rr232x		# Highpoint RocketRAID 232x
    #device		iir		# Intel Integrated RAID
    #device		ips		# IBM (Adaptec) ServeRAID
    #device		mly		# Mylex AcceleRAID/eXtremeRAID
    device		twa		# 3ware 9000 series PATA/SATA RAID
    
    # RAID controllers
    #device		aac		# Adaptec FSA RAID
    #device		aacp		# SCSI passthrough for aac (requires CAM)
    #device		ida		# Compaq Smart RAID
    #device		mfi		# LSI MegaRAID SAS
    #device		mlx		# Mylex DAC960 family
    #device		pst		# Promise Supertrak SX6000
    #device		twe		# 3ware ATA RAID
    
    # atkbdc0 controls both the keyboard and the PS/2 mouse
    device		atkbdc		# AT keyboard controller
    device		atkbd		# AT keyboard
    #device		psm		# PS/2 mouse
    
    device		kbdmux		# keyboard multiplexer
    
    device		vga		# VGA video card driver
    
    device		splash		# Splash screen and screen saver support
    
    # syscons is the default console driver, resembling an SCO console
    device		sc
    
    # Enable this for the pcvt (VT220 compatible) console driver
    #device		vt
    #options 	XSERVER		# support for X server on a vt console
    #options 	FAT_CURSOR	# start with block cursor
    
    device		agp		# support several AGP chipsets
    
    # Power management support (see NOTES for more options)
    #device		apm
    # Add suspend/resume support for the i8254.
    device		pmtimer
    
    # PCCARD (PCMCIA) support
    # PCMCIA and cardbus bridge support
    #device		cbb		# cardbus (yenta) bridge
    #device		pccard		# PC Card (16-bit) bus
    #device		cardbus		# CardBus (32-bit) bus
    
    # Serial (COM) ports
    device		sio		# 8250, 16[45]50 based serial ports
    
    # Parallel port
    device		ppc
    device		ppbus		# Parallel port bus (required)
    device		lpt		# Printer
    device		plip		# TCP/IP over parallel
    #device		ppi		# Parallel port interface device
    #device		vpo		# Requires scbus and da
    
    # If you've got a "dumb" serial or parallel PCI card that is
    # supported by the puc(4) glue driver, uncomment the following
    # line to enable it (connects to the sio and/or ppc drivers):
    #device		puc
    
    # PCI Ethernet NICs.
    #device		de		# DEC/Intel DC21x4x (``Tulip'')
    #device		em		# Intel PRO/1000 adapter Gigabit Ethernet 
    #Card
    #device		ixgb		# Intel PRO/10GbE Ethernet Card
    #device		txp		# 3Com 3cR990 (``Typhoon'')
    #device		vx		# 3Com 3c590, 3c595 (``Vortex'')
    
    # PCI Ethernet NICs that use the common MII bus controller code.
    # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
    device		miibus		# MII bus support
    device		bce		# Broadcom BCM5706/BCM5708 Gigabit Ethernet
    device		bfe		# Broadcom BCM440x 10/100 Ethernet
    device		bge		# Broadcom BCM570xx Gigabit Ethernet
    device		dc		# DEC/Intel 21143 and various workalikes
    device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
    #device		lge		# Level 1 LXT1001 gigabit Ethernet
    #device		nge		# NatSemi DP83820 gigabit Ethernet
    device		nve		# nVidia nForce MCP on-board Ethernet Networking
    #device		pcn		# AMD Am79C97x PCI 10/100(precedence over 
    #'lnc')
    device		re		# RealTek 8139C+/8169/8169S/8110S
    device		rl		# RealTek 8129/8139
    device		sf		# Adaptec AIC-6915 (``Starfire'')
    #device		sis		# Silicon Integrated Systems SiS 900/SiS 
    #7016
    #device		sk		# SysKonnect SK-984x & SK-982x gigabit 
    #Ethernet
    #device		ste		# Sundance ST201 (D-Link DFE-550TX)
    #device		ti		# Alteon Networks Tigon I/II gigabit 
    #Ethernet
    #device		tl		# Texas Instruments ThunderLAN
    #device		tx		# SMC EtherPower II (83c170 ``EPIC'')
    #device		vge		# VIA VT612x gigabit Ethernet
    #device		vr		# VIA Rhine, Rhine II
    #device		wb		# Winbond W89C840F
    #device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
    
    # ISA Ethernet NICs. pccard NICs included.
    device		cs		# Crystal Semiconductor CS89x0 NIC
    # 'device ed' requires 'device miibus'
    #device		ed		# NE[12]000, SMC Ultra, 3c503, DS8390 
    #cards
    #device		ex		# Intel EtherExpress Pro/10 and Pro/10+
    #device		ep		# Etherlink III based cards
    #device		fe		# Fujitsu MB8696x based cards
    #device		ie		# EtherExpress 8/16, 3C507, StarLAN 10 
    #etc.
    #device		lnc		# NE2100, NE32-VL Lance Ethernet cards
    #device		sn		# SMC's 9000 series of Ethernet chips
    #device		xe		# Xircom pccard Ethernet
    
    # Wireless NIC cards
    #device		wlan		# 802.11 support
    #device		an		# Aironet 4500/4800 802.11 wireless NICs.
    #device		awi		# BayStack 660 and others
    #device		ral		# Ralink Technology RT2500 wireless NICs.
    #device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless 
    #NICs.
    #device		wl		# Older non 802.11 Wavelan wireless NIC.
    
    # Pseudo devices.
    device		loop		# Network loopback
    device		random		# Entropy device
    device		ether		# Ethernet support
    device		sl		# Kernel SLIP
    device		ppp		# Kernel PPP
    device		tun		# Packet tunnel.
    device		pty		# Pseudo-ttys (telnet etc)
    device		md		# Memory "disks"
    device		gif		# IPv6 and IPv4 tunneling
    device		faith		# IPv6-to-IPv4 relaying (translation)
    
    # The `bpf' device enables the Berkeley Packet Filter.
    # Be aware of the administrative consequences of enabling this!
    # Note that 'bpf' is required for DHCP.
    device		bpf		# Berkeley packet filter
    
    # USB support
    #device		uhci		# UHCI PCI->USB interface
    #device		ohci		# OHCI PCI->USB interface
    #device		ehci		# EHCI PCI->USB interface (USB 2.0)
    device		usb		# USB Bus (required)
    #device		udbp		# USB Double Bulk Pipe devices
    #device		ugen		# Generic
    #device		uhid		# "Human Interface Devices"
    #device		ukbd		# Keyboard
    #device		ulpt		# Printer
    device		umass		# Disks/Mass storage - Requires scbus and da
    #device		ums		# Mouse
    #device		ural		# Ralink Technology RT2500USB wireless 
    #NICs
    #device		urio		# Diamond Rio 500 MP3 player
    #device		uscanner	# Scanners
    # USB Ethernet, requires miibus
    #device		aue		# ADMtek USB Ethernet
    #device		axe		# ASIX Electronics USB Ethernet
    #device		cdce		# Generic USB over Ethernet
    #device		cue		# CATC USB Ethernet
    #device		kue		# Kawasaki LSI USB Ethernet
    #device		rue		# RealTek RTL8150 USB Ethernet
    
    # FireWire support
    #device		firewire	# FireWire bus code
    #device		sbp		# SCSI over FireWire (Requires scbus and 
    #da)
    #device		fwe		# Ethernet over FireWire (non-standard!)

  2. #2
    นักการภารโรง สัญลักษณ์ของ บ่าวคนเดิม
    วันที่สมัคร
    Jan 2006
    ที่อยู่
    Amphoe Det Udom
    กระทู้
    3,148

    Re: การทำ STABLE FreeBSD 6.1 แบบ Step by Step (Upgrade System from Sources)

    ขอบคุณมากครับ....
    สำหรับเวอร์ชั่น 5.4 หลักการน่าจะคล้ายกัน .
    ขอบพระคุณสมาชิกและทีมงานที่เคารพรักทุกท่าน

  3. #3

    Re: การทำ STABLE FreeBSD 6.1 แบบ Step by Step (Upgrade System from Sources)

    Re: การทำ STABLE FreeBSD 6.1 แบบ Step by Step (Upgrade System from Sources) กระทู้ต้นฉบับโดยคุณ +☺♫บ่าวคนเดิม™+
    ขอบคุณมากครับ....
    สำหรับเวอร์ชั่น 5.4 หลักการน่าจะคล้ายกัน .
    ถูกต้องแล้ว

    เอ่อ ลืมบอกไปว่า ในการ compile kernel ใหม่เนี่ย

    จะช้า จะเร็ว ขึ้นอยู่กับ ความเร็วของเซิร์ฟเวอร์ และอินเตอร์เน็ต


  4. #4

    Re: การทำ STABLE FreeBSD 6.1 แบบ Step by Step (Upgrade System from Sources)

    [center]
    ข่าวดีสำหรับบ่าวกันต์ วันนี้

    โพดแล่ว อ้ายบ่าว เอ้ย บ่าวกันต์ เฮ็ด Stable แล้วแล่ว ถ่ามาโดนเติบ

    ตั้งแต่เช้า หากว่าสิแล่ว (เบิ่งเวลาเอาเด้อ)

    Re: การทำ STABLE FreeBSD 6.1 แบบ Step by Step (Upgrade System from Sources)

  5. #5
    นักการภารโรง สัญลักษณ์ของ บ่าวคนเดิม
    วันที่สมัคร
    Jan 2006
    ที่อยู่
    Amphoe Det Udom
    กระทู้
    3,148

    Re: การทำ STABLE FreeBSD 6.1 แบบ Step by Step (Upgrade System from Sources)

    ป้าด...ข้ามมื้อข้ามืนอิหลีตั๊วนิ......เว้าเป้นตะม่วนแท้น้อ
    ขอบพระคุณสมาชิกและทีมงานที่เคารพรักทุกท่าน

  6. #6

    Re: การทำ STABLE FreeBSD 6.1 แบบ Step by Step (Upgrade System from Sources)

    ขอบอกว่า ได้ระบบใหม่มานิ

    ปิด/เปิด เครื่องเร็ว ฮ้ายกว่าสายฟ้า

    ขนเอาสิ่งที่บ่จำเป็นออกไปถิ่มแหมะ

    โพดๆๆๆ ขั้นตอน เบิ่งทางเทิงเด้อ ตัวอย่างไฟล์ /usr/src/sys/i386/conf/MYKERN

Tags for this Thread

กฎการส่งข้อความ

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •